Helmets and Gloves

Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Replacement Pads for Lazer's BOB Helmet

Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer G1 and G1 MIPS helmets. This is the standard padset. Set includes four pads - front pad, two top side pads and one top center pad. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Jackal MIPS helmets. Set includes one pad - Front/Top unipad only. - COMPATIBILITY: Jackal MIPS, Jackal - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Got some hard-to-reach grime you just can't get to? Or just want to grab your bike with both hands and get down to it? Then reach for the Muc-Off Deep Scrubber Gloves, you just won't believe how fast you can get your pride and joy thoroughly clean! Made from durable and high-strength silicone, these gloves make cleaning tight spots quicker and easier than ever. With flexible bristles that cover the palm and each finger, you'll be able to scrub away at grime in record time as you caress the surface rapidly with your hands. Just spray on our bike cleaner or snow foam either onto the area to be cleaned or directly onto the gloves and get scrubbing. - Heavy-duty scrubber glove - Made from a heavyweight silicone - Bristled palms for easy cleaning of parts

Perfect for anyone working on a bicycle, motorcycle or car, the Mechanics Gloves are designed to offer the hand total 360-deg comfort and protection against most cuts and scratches with minimal impact to dexterity. Gone are the days of taking the skin off your knuckles when removing a difficult to remove bolt or pedal! SIZE GUIDE: Small = 7.5 - 8" (19 - 20cm) Medium = 8 - 8.5" (20 - 21.5cm) Large = 8.5 - 9" (21.5 - 23cm) XL = 9 - 10" (23 - 25cm) (To find your size, measure the circumference around the knuckles excluding the thumb - your hand should be open with the fingers together).

- Replacement X-Static pads for Lazer's Wasp Air Helmet - X-Static pads are an anti-microbial, self-cleaning pad system

- Replacement Pads for Lazer's Blade, Magma, Elle, or Jade helmets - X-Static pads are an anti-microbial, self-cleaning pad system

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon

A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions LED light for Lazer TSPLUS retention system COMPATIBILITY - Tonic MIPS - Tonic - Tardiz2 - Coyote MIPS - Coyote - Chiru MIPS - Next+ - Compact DLX MIPS - Compact DLX - Compact - BATTERY TYPE: CR2032 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: TS+ mechanism - WEIGHT: 12g - MATERIAL: LED light

Muc-Off's Scrubber Gloves are made from durable and high-strength silicone, these gloves make cleaning tight spots quicker and easier than ever. With flexible bristles that cover the palm and each finger you’ll be able to scrub away at grime in record time as you caress the surface rapidly with your hands. Just spray on our bike cleaner or snow foam either onto the area to be cleaned or directly onto the gloves and get scrubbing! - Reusable, waterproof silicone gloves made from durable, high strength silicone - Flexible bristles cover the whole palm and each finger making cleaning fast and easy, but are also gentle enough not to damage delicate surfaces - Built in inner anti-slip surface for maximum control - Heat Resistance up to 230 degrees Celsius. Can be used with warm water and cleaned with hot water or can be put in the dishwasher (100% dishwasher safe - 100% Food-Grade Silicone, PBA Free, Non-Corrosive, Non-Toxic, Eco-Friendly

With kid-friendly graphics, the Kid Ride gloves are essential for your toddler's entry riding days. Technical Details - Upper Hand: Stretchable spandex - Palm: Leather-like material, patented Ergo Air ventilation - Padding: Foam padding - Features: Soft microfiber thumb to wipe sweat - ErgoAir Zone 10mm Foam Padding

Visor for Coyote helmet COMPATIBILITY - Coyote MIPS - Coyote - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Visor for Impala helmet COMPATIBILITY - Impala MIPS - Impala - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

The Aries are stylish and performance-minded half finger cycling gloves for all your cycling escapades. They’ll keep your hands comfortable and cool during your long summer days out on the road. - Style: Half Finger - Padding: 1mm foam - Season: warm weather - Closure: hook and loop closure - Easy–Off Glove Removal Tab Material: - Lycra backing and forchettes for superior fit and cool comfort - Synthetic leather palm with venting is reinforced for superior grip comfort and handlebar feel - Soft low-profile terry cloth wiping surface on thumb and index finger - Tricot inner lining for comfort

The Calory JR kids' glove offers all the essential features of a comfortable cycling glove while being affordable and perfect for your little ones. With its well-padded palm, super ventilated fabric and easy to adjust cuff, your enthusiastic youngsters will be well equipped to go a long way while having their hands protected.

Long hours in the saddle mean long hours on the bars, and with Pearl Izumi's Elite Gel Gloves covering your digits, you can count on comfort the entire time. Featuring Pearl's 1:1 Gel padding, the Elite Gel Gloves create bridges over the ulnar and median nerves to ensure comfort and strength. Getting the gloves on and off is a snap thanks to hook-and-loop straps, and the synthetic-leather construction is soft and durable. And, with 1:1 Glove Fit, you can be sure your gloves stay in place throughout your ride, regardless of the conditions.

A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 34g - MATERIAL: Polycarbonate